Close or Esc Key

Arduino Projects   |   Raspberry Pi   |   Electronic Circuits   |   AVR   |   PIC   |   8051   |   Electronic Projects

interface voice board(input to 8051) to 8051 microcontroller.

6 posts / 0 new
Last post
kapil
kapil's picture
Offline
Last seen: 4 years 8 months ago
Joined: 19/09/2010 - 12:39
interface voice board(input to 8051) to 8051 microcontroller.

hi
I have to interface voice board(input to 8051) to 8051 microcontroller.
Can u provide me some suggestions for it

 

I have model 1180 Speech recognition system of Sunrom Technologies which has HM2007 speech recognition IC.

I have to interface this boaerd to 8051.

 

Thanks,

kapil

kapil
kapil's picture
Offline
Last seen: 4 years 8 months ago
Joined: 19/09/2010 - 12:39
I need it urgently .  

I need it urgently .

 

nikhiljain
nikhiljain's picture
problem

 where exactly are you facing the problem? the Sunrom module that you have should be fairly easy to interface.

kapil
kapil's picture
Offline
Last seen: 4 years 8 months ago
Joined: 19/09/2010 - 12:39
interface voice board(input to 8051) to 8051 microcontroller.

I have to transgfer input data from voice board to port 2 of microcontroller.

Let me know what should be the pins used and how to transfer that data to port 2 of microcontroller.

Which SFR or register is used to transfer data from voice board to port 2 of microcontroller.

 

Thanks,

rahul

Shashiraj Shettyan M
Shashiraj Shettyan M's picture
Offline
Last seen: 2 months 5 days ago
Joined: 19/03/2016 - 18:39
Even i am trying the same. I

Even i am trying the same. I used geetech voice recognition module and connected to 8051 devolopment board. I am taking input from serial port. I have written the code also . but not getting output. I have connected led at output.. my email-id is shashiraj.shettyan@gmail.com .. please help.

Ashutosh Bhatt
Ashutosh Bhatt's picture
Offline
Last seen: 3 days 14 hours ago
Joined: 21/12/2010 - 15:59
as per my knowledge this

as per my knowledge this module gives 4 bit digital output.

as per programmed word it can give outputs 0000 to 1111. that you hv to take as input on port 2 thats all

that may be given in its datasheet - manual also. the program code may be also given