United Electronic Industries (UEI) unveiled its latest innovation, the DNx-MF-102 multifunction analog and digital I/O board with 2 CAN ports compatible with all UEI I/O chassis systems. The board offers a powerful combination of 34 analog and digital I/O channels combined with, two CAN ports and one RS-232/422/485 port. This board is integral to any…

TDK Corporation introduces the HWS3000 programmable AC-DC power supplies in the TDK-Lambda series. These units deliver up to 3000 watts in a 270 x 150 x 61mm case size. The HWS3000 offers programmable output voltages of 24V, 48V, 60V, or 130V, with the ability to adjust from zero to maximum rating. Engineers can choose between…

TDK Corporation announces additional output voltage models to the 250W rated TDK-Lambda brand CUS250M series of power supplies in the industry standard 2” x 4” footprint. The full range now covers 12V, 15V, 18V, 24V, 28V, 36V, and 48V and is certified to the IEC 62368-1 and IEC 60601-1 safety standards for industrial and medical…

Many types of electronic devices now benefit from the higher reliability of automotive grade resistors.  By specifying automotive grade resistors, design engineers in any market segment can increase electrical stability and environmental reliability without the significant increase in cost normally associated with established reliability resistors. Stackpole’s RMCA series is AEC Q200 qualified and provides excellent long-term reliability.  The…

The MF423-4-3D-BS Three Phase EMI Filter Series from EMIS is designed to effectively reduce electrical noise and ensure a clean power supply across various applications, including renewable energy systems and industrial machinery. This dual-stage EMI filter offers high attenuation for both line-to-ground and line-to-line emissions, enhancing system reliability and conducted immunity when connected to the…

Nexperia announced the addition of two new ideal diode ICs to its continuously growing portfolio of power devices. The NID5100 is suitable for standard industrial and consumer applications while the NID5100-Q100 has been qualified for use in automotive applications. Ideal diodes are MOSFET based devices that offer much lower forward voltage drop than traditional diodes…

Advanced Energy Industries, Inc. has announced the LumaDrive Pre-wired Systems series of high-efficiency remote centralized drivers for large-scale horticultural, greenhouse, and industrial LED lighting applications. These platforms combine multiple 4 kW modules into a cost-effective pre-wired cabinet that simplifies installation, enables simple “hot swap” repairs, eliminates extra dimming control connections, and reduces the overall cost…

Molex has announced the Percept Current Sensors, designed to meet the demand for precise busbar current sensing in industrial and automotive applications. These sensors incorporate Infineon’s coreless current sensors and Molex’s proprietary electronics packaging technology, resulting in smaller, lighter devices that simplify installation and system integration. The Percept Current Sensors feature a compact, coreless design and…

Nexperia announced the NPS3102A and NPS3102B electronic fuses (eFuses) as the latest additions to its ever-expanding power device portfolio. These low-ohmic (17 mΩ), high current (13.5 A), and resettable electronic fuses help to protect downstream loads from exposure to excessive voltages while also protecting power supplies from load faults and large inrush currents. These eFuses…

Samtec, Inc. has expanded its A-Series family of connectors with new additions that include a Level 3 Product Part Approval Process (PPAP) package for automobile applications. The series, comprising over 100 connectors, is designed for space-constrained, rugged applications within vehicles. The latest additions include right-angle and edge connectors, addressing the needs of automotive lighting, infotainment, and…

Texas Instruments (TI) introduced six new power modules aimed at enhancing power density, efficiency, and EMI reduction. These modules utilize TI’s MagPack integrated magnetic packaging technology, reducing size by up to 23% compared to competitors. These power modules leverage TI’s proprietary MagPack integrated magnetic packaging technology, shrinking their size by up to 23% compared to…

OmniOn Power has introduced new FPLX-series dc-dc converters to its DLynx III family of non-isolated point-of-load (POL) modules. The new FPLX015 (15-amp), FPLX020 (20A), and FPLX030 (30A) modules feature 10 mm by 10 mm footprints and provide power densities of 97 A/in2, 129 A/in2, and 194 A/in2, respectively. The common footprint across all three modules offers…

TDK Corporation announces the introduction of 90kW rated GSPS 20U 19-inch racking cabinets to the TDK-Lambda GENESYS+ series of programmable DC power supplies. The GSPS systems seamlessly transition across constant voltage, constant current and constant power limit operating modes. The cabinets are mounted on lockable castors (wheels) to enable them to be easily repositioned around…

Amphenol RF is pleased to introduce the IP67 waterproof FAKRA generation 2 rear mount bulkhead straight plug into our expansive automotive portfolio. This connector is designed to accommodate the industry-standard RG-174 cable type which offers excellent signal integrity and low loss, and is optimal for outdoor use. This FAKRA plug is available in the universal…

KYOCERA AVX has released the new 9289-000 Series waterproof wire-to-wire connectors. These connectors are designed for IP67 connections in industrial, transportation, commercial, and consumer electronics applications. The 9289-000 Series are single-piece, three-position waterproof wire-to-wire connectors. They are the sixth poke-home wire-to-wire connector series in the KYOCERA AVX portfolio and the first to be waterproof. These connectors are…

StarTech.com has announced the availability of a new line of USB to Serial Adapters. These adapters use the customizable FTDI chip to add RS-232 capabilities to USB-enabled computers, allowing connectivity with Data Communication Equipment (DCE) peripherals such as digital signage, industrial equipment, and point-of-sale devices. The driverless installation ensures universal compatibility with Windows 7 and above,…

TDK Corporation expands its tunnel-magnetoresistance (TMR) angle sensor portfolio with the launch of the TAS8240 sensor for automotive and industrial applications. This latest addition, available in both compact QFN16 (3 x 3 mm²) and TSSOP16 (5 x 6.4 mm²) packages, offers four redundant analog single-ended SIN/COS outputs and low power consumption. This sensor facilitates precise…

Infineon Technologies AG has announced the availability of the industry’s first radiation-hardened (rad hard) 1 and 2 Mb parallel interface ferroelectric-RAM (F-RAM) nonvolatile memory devices. These new additions to Infineon’s memory portfolio offer up to 120 years of data retention at 85 degrees Celsius, along with random access and full memory write at bus speeds.…

SCHURTER has introduced a new family of chokes designed for very high currents. The new current-compensated choke DKUH-1 is designed for currents ranging from 50 to 100A and supports a high voltage of 800 VDC, making it suitable for high-power energy applications. As energy applications become more compact and efficient, there is an increase in…

Nexperia has announced that its 650 V, 10 A silicon carbide (SiC) Schottky diode is now automotive qualified (PSC1065H-Q) and available in real-two-pin (R2P) DPAK (TO-252-2) packaging, making it suitable for various applications in electric vehicles and other automobiles. Additionally, Nexperia is offering industrial-grade devices with current ratings of 6 A, 16 A, and 20 A…