Arduino Projects   |   Raspberry Pi   |   Electronic Circuits   |   AVR   |   PIC   |   8051   |   Electronic Projects

Upgrade the firmware of Long Range Wireless Temperature Sensor through wireless communication

2 posts / 0 new
Last post
Snart
Snart's picture
Offline
Last seen: 6 months 2 weeks ago
Joined: 28/11/2018 - 19:07
Upgrade the firmware of Long Range Wireless Temperature Sensor through wireless communication

Hi, 

I have been working with a Mesh network in which I am using long-range Wireless Temperature Sensor which is connected around 80 meters away from each other as well as from 900hp-S3-B wireless mesh modem.

As only Wireless Mesh modem is connected to the Company's Computer and I can upgrade the mesh modem through the internet using XCTU software but can you suggest me the way which can easily help to upgrade the wireless temperature sensor which supports the similar device.

 

Any kind of advice on this will be a great help. 

Richard
Richard's picture
Offline
Last seen: 6 months 1 week ago
Joined: 11/02/2019 - 13:15
is the specific wireless

is the specific wireless temperature sensor upgradable from a network ... that need to be checked with the particular vendor...If that is so, there must be some manual for that

Log in or register to post comments