Texas Instruments DP83TD510E-EVM Ethernet PHY Evaluation Module (EVM) highlights the low power long cable reach capabilities of the 10Base-T1L IEEE 802.3cg compliant DP83TD510 PHY. The DP83822 media converter board is provided for 10BASE-TX Standard Ethernet support and fast system bring-up. The Texas Instruments DP83TD510E-EVM also provides onboard tools to configure the PHY register using the USB-MDIO graphical user interface tool.
A DP83822I media converter board enables bit-error rate testing, interoperability testing, and PMA compliance testing. The EVM can be powered by a Wide-Vin 5V-36V power supply or through a micro USB cable. Both DP83TD510E and DP83822I can be set to RMII Master or Slave through an on-b0ard 25MHz crystal oscillator or the other’s RMII 50MHz clock, respectively
The DP83TD510E block of the DP83TD510E-EVM can operate from a single DC supply connected to terminal block J12. The DP83822I media converter board is powered by the VDDIO and VDDA supplies of theDP83TD510E board through the Samtec connector.
Features:
- Media converter (10BASE-T1L to 10BASE-TX)
- DP83TD510E IEEE802.3cg compliant
- 10Base-TX interface for standard Ethernet RJ-45 connection using DP83822H
- RMII Back-to-Back configuration
- Variable I/O Voltage Range: 1.8V, 2.5V, and 3.3V
- Bootstraps for Hardware Configuration
- Onboard USB2MDIO to configure PHY
- USB-2-MDIO support
- 4-Pin DIP switch
- Status LEDs
- DP83TD510E
- Link
- Link + Activity
- DP83822
- Link
- SMI Command
- DP83TD510E
- 10BASE-T1L Error Free Data transfer Over 1000 meters
- 10BASE-T1 Error Free Data transfer over 200 meters
Software:
- MSP430 Driver
- USB-2-MDIO Software
Sponsored Content by Mouser Electronics
Filed Under: Sponsored Content
Questions related to this article?
👉Ask and discuss on Electro-Tech-Online.com and EDAboard.com forums.
Tell Us What You Think!!
You must be logged in to post a comment.