Close or Esc Key

Arduino Projects   |   Raspberry Pi   |   Electronic Circuits   |   AVR   |   PIC   |   8051   |   Electronic Projects

dtmf tones generation

7 posts / 0 new
Last post
Anonymous
Anonymous's picture
dtmf tones generation

In DTMF(dual tone multi frequency) generator ic the two frequencies are mixed in appropiate way and a DTMF tone is generated.

Can the DTMF tones can be generated from two individual frequencies, OR how to mix the frequencies to produce a DTMF tone, what is the appropiate way to mix the frequencies.

raj
raj's picture
Offline
Last seen: 5 years 6 months ago
Joined: 08/09/2010 - 08:07
question

   In which purpose we are using it

nikhiljain
Anonymous's picture
mixing frequncy

did u try mixing two frequencies directly? 

Murat diindar
Murat diindar's picture
Offline
Last seen: 8 years 8 months ago
Joined: 12/10/2010 - 11:43
i think this link may be

i think this link may be helpful for you....

http://www.sunrom.com/files/1218-datasheet.pdf

manu
manu's picture
Offline
Last seen: 3 years 9 months ago
Joined: 11/12/2010 - 12:48
 use a dtmf encoder IC 8870.

 use a dtmf encoder IC 8870.

SUNIL KUMAR. R
SUNIL KUMAR. R's picture
Offline
Last seen: 7 years 7 months ago
Joined: 13/12/2010 - 14:10
DTMF TONE GENERATION

Hi,

 

8870 is not a DTMF encoder , Its a DTMF DECODER.

 

I have tried MT8880 and it worked awesome.

Its even easy to generate the dtmf tones..

Just by applying different binary combinations to the data pins u can generate various dtmf tones.

8880 also acts as a decoder.

Thats why the 8880 IC is called as DTMF TRANSCEIVER. ( TRANSMIT + RECEIVE )

 

For generating the binary code words u can go for the following methods :

1.Use a microcontroller to generate the bits.

2.or try some logic circuits.

3.or just set the bits high or low by directly the data pins to the power supply(logic 1) or to the ground (logic 0).

 

Hope this helps.

 

Linus.Robotique

Engr. Mansoor Mirza
Engr. Mansoor Mirza's picture
Offline
Last seen: 8 years 1 month ago
Joined: 10/11/2010 - 20:04
dtmf tones generation

 

you can generate DTMF signal from you PC using Visual Basic and can also generate using 8051... see this link

 

 

http://www.8051projects.net/downloads36.html