Close or Esc Key

Arduino Projects   |   Raspberry Pi   |   Electronic Circuits   |   AVR   |   PIC   |   8051   |   Electronic Projects

dspic30f3014 pic kit 3 programming failed after 1st time

2 posts / 0 new
Last post
rajesh kolhe
rajesh kolhe's picture
Offline
Last seen: 2 months 1 week ago
Joined: 14/04/2016 - 01:47
dspic30f3014 pic kit 3 programming failed after 1st time

frist time firing hex file is ok

when i trying refire hex file this error comes while programming .... programming failed following memory adress region etc.etc.

when i read hex file from dspic30f3014 is  ok 

when i goto refire readed hex file is successfully programmed

i have try this with 2 ics same problem is happend only 1st time programme burned in ic and aslo it doent work 

 

this is very biggest issue i have faced with this microcontroller 

 

Ashutosh Bhatt
Ashutosh Bhatt's picture
Offline
Last seen: 2 weeks 4 days ago
Joined: 21/12/2010 - 15:59
your program code may be of

your program code may be of higher memory capacity than internal ROM of your micro controller

the program address range may be out of internal ROM 

]]>]]>