Close or Esc Key

Arduino Projects   |   Raspberry Pi   |   Electronic Circuits   |   AVR   |   PIC   |   8051   |   Electronic Projects

Which Microcontroller should I use for my project?

2 posts / 0 new
Last post
Navyansh
Navyansh's picture
Offline
Last seen: 6 days 13 hours ago
Joined: 19/05/2017 - 19:16
Which Microcontroller should I use for my project?
Hi,
I'm fairly new to microcontrollers and have read multiple guides, although still asking the question.
I have used Arduino for quite a long time and have developed some product concept. I am only 14 years old though. 
I am currently developing a wearable project, therefore size, weight, and battery are huge constraints.
My project will include; Touch OLED, Gyro, IR LED and receiver.
As I have used Arduino, I am quite familiar with the Arduino offset of C++.
It will be appreciated if the MCU has example codes/ others have used similar components. 
Could you please help me on both; hardware and software. 

Thankyou in advance.
 

 

Ashutosh Bhatt
Ashutosh Bhatt's picture
Offline
Last seen: 1 day 13 hours ago
Joined: 21/12/2010 - 15:59
because you are using TOUCH

because you are using TOUCH OLED

it requires bit more memory foot print for program and code

so you have to select micro controller with more internal memory (FLASH) like ATMega256 (Arduino MEGA)

arduino nano and pro mini are of small size but they have only 32KB of internal memory. not enough for OLED based application