Making an Electric Gun with the help of Home Supplies

For those who have been looking for simple DIY designs and structures, Navin Khambala really has a lot in store for them. He is known for offering the most creative and simple solutions for all things that can complicate matters for you. Here, in this blog we will give you a preview with a simple electric gun that was built by him with some simple home appliances. For this purpose, he used some crayons, a push button, a DC motor for winding up the spring for shooting, a handle, and plastic tube. The motor works on some batteries. And the best part, the complete cost of this project is less than $10. 

 

 

 

To make this gun, you need to start  with the plastic pipe and spring. Make marking over the pipe as per the spring length and cut is from one end to fit the spring in it. Once you fit the spring in the tube. Next, take aboard with a hole in it and fit the motor in it with a screw. On the outer side, glue the spring laden pipe. Make sure you put the end with spring on the inner side and the simple one of the outer end. Stabilize the pipe on board with some more wooden pieces so that when you shoot, the reverse motion doesn’t dislocate it from its place. 

 

Now take the crayons and glue them together. Fit these pipes beneath the pipe and motor joint. To see all steps clearly, just click on this YouTube video https://youtu.be/_ZHgjyAX6mk. Just remember, the one you have created is a weapon, so use it carefully and wisely. Always use protective glasses when you use it and do not take a shot at anyone. Other details can always be checked out at the link mentioned in the source.