Maxim Integrated Products Roll out Dual IO-Link Master Transceiver with 50% lower Power for Industry 4.0 Applications

Maxim Integrated Products Inc., a reputed company that designs, manufactures, and sells analog as well as mixed-signal integrated circuits, has introduced the MAX14819. It’s a dual-channel, IO-Link master transceiver that will allow designers of Industry 4.0 applications to achieve robust communications and reduce power dissipation by 50%. 

 

The fanless programmable logic controller (PLC) and IO-Link gateway systems used in the present time must dissipate large amounts of power depending on IO configuration including the IO-Link, digital input/output, analog input/output. However with the evolution of these PLCs into new Industrial 4.0 smart factories, there is a need to achieve smarter, faster, and lower power solution while meeting IO-Link and standard IO (SIO) compliance. 

 

 

Discussing the features, the MAX14819 has a unique architecture with 50% less heat as compared to other IO-Link Master solutions and is fully compatible with all modes for IO-Link and SIO compliance. It is also equipped with robust L+ supply controllers with settable current limiting and reverse voltage/current protection help ensure robust communications with the lowest power consumption. 

 

Packed with just one microcontroller, the integrated framer/universal asynchronous receiver-transmitter (UART) allows the most scalable and cost-effective architecture. This gives way to the industry’s fastest cycle times of up to 400 microseconds and a reduced latency. 

 

Dimensionally, the MAX14819 is available in a 48-pin (7 mm x 7 mm) TQFN package and operates over the -40°C to +125°C temperature range.

 

 

• Low on-resistance, low supply current, and optimized current limiter architecture for significantly lower power consumption.

 

• Integrated internal framer/UART enables the most flexible architecture while still achieving the fastest cycle times to achieve the lowest bill of materials (BOM) cost by eliminating the UART dependency from the microcontroller.

 

• 65V absolute maximum ratings and reverse polarity protection help to meet full compliance with IO-Link (1.1.2) and SIO (IEC61131-2, IEC61131-9) modes; also operates with NPN type sensors.

 

 

The MAX14819 is available for USD 6.03 (1000-up, FOB USA) at Maxim’s website and select authorized distributors. An evaluation kit MAX14819EVKIT is available for USD 99.

 

 

Maxim Integrated develops innovative analog and mixed-signal products and technologies to make systems smaller and smarter, with enhanced security and increased energy efficiency. We are empowering design innovation for our automotive, industrial, healthcare, mobile consumer, and cloud data center customers to deliver industry-leading solutions that help change the world.