Arduino Projects   |   Raspberry Pi   |   Electronic Circuits   |   AVR   |   PIC   |   8051   |   Electronic Projects

8051 Tutorials & Projects

8051 Tutorials & Projects: Learn to work with 8051 microcontroller and interface various peripheral devices. Explained with the help of circuit diagrams, source codes, and working videos, this section of EG Labs brings you interesting microcontroller projects based on 8051 microcontroller. These 8051 projects can serve as a good reference for final year electronics engineering projects.
Latest 8051 Tutorials & Projects

In most of the manufacturing industries, it is required to rotate DC/AC motor forward and reverse alternatively for desired time. First motor rotates forward (clockwise) for some time (say few minutes or even seconds). Then it stops for some time. Again it rotates reverse (anticlockwise) for some time and stops. This process continues. For example, in automated bottle filling plant, the bottles are moving on conveyor belt. When it comes under filler, the filler comes down (that means motor attached with mechanism rotates forward) then it fills the bottle (that means motor stops) again it goes up (motor rotates reverse) and stops until next bottle arrives. For moving filler up and down the time of rotating motor forward and reverse is calibrated and fixed. Also the motor stop time is calibrated based on time required to fill the bottle and the next bottle arrives.

The GPS receiver is used to get accurate geographical location by receiving information from satellites. It receives information from satellites and gives location information in terms of latitude and longitude. It gives latitude and longitudes with accuracy of degree-minute-second. Using this latitude and longitude co-ordinates one can easily trace out the location on entire globe. The GPS receivers have enormous applications.

The GPS receiver gives output serially in form of strings with NMEA 0183 protocol. These strings are received serially by host computer or host processor/controller for display or to take any decision or action. The following figure shows the output of GPS receiver on hyper terminal of desktop computer.  

Save Money on Automated Home Lighting System

Want to know why your monthly Electricity bills are "so high"? Take a closer look at the Lights or Fans, when a person inside the room leaves the room hastily, He or She unknowingly leaves the Lights switched on.

So, what next? The only way for this is Intelligent Automated Home Lighting System. In this system when a person enters the room the tube lights are switched on automatically. The light switches go off automatically when there is no body inside the room. The whole Intelligent Automated Home Lighting System is now at the tip of your motion. As one moves inside the room the bulb switches on and as one leaves the room it switches off.