Close or Esc Key

Arduino Projects   |   Raspberry Pi   |   Electronic Circuits   |   AVR   |   PIC   |   8051   |   Electronic Projects

Introducing The New Range Of Vishay Safety Resistors And Safety-Rated RFI Capacitors

Submitted By: 

Shreepanjali Mod
Vishay Safety-Rated RFI capacitors as well as Fusible Safety Resistors offer higher reliability under very harsh environments that keeps them safe against failures that leads to either fire or electric shock. Here is a detailed look in these products:
 
Introducing The New Range Of Vishay Safety Resistors And Safety-Rated RFI Capacitors
(Image source: Mouser Electronics)
 
AC-CS UL1412-Recognized Wirewound Fusible Safety Resistors: Vishay / Draloric AC0x, CS Series Axial Cemented Fusible Wirewound Safety Resistors happen to be specifically selected resistive winding wires along with special non-flammable silicone cement coating stuff that ensures a silent and  safe fusing operation under overloaded conditions. The resistor fuses without any boom when AC mains voltage is implemented and also behaves as inrush current limiting resistor for regular operations. The prime features include a guarantee of silent and safe fusing operation under overloaded situations. These can be used for power supplies, white goods, LED drivers, electric appliances, and energy meters. 
 
PRO2-FS Non-Inductive Fusible Flameproof Safety Resistors: These resistors provide defined fusing features at some pre-defined overload conditions. This new series of resistors from Vishay / BC Components series fuses with  UL1412 safety benchmarks, these resistors also feature an ability to take on voltage above 600V. These products also provide a rapid fusing time which is less than 10 seconds for an overload valued at 80W, these are designed to disconnect domestic electric appliances from power supply instantly. 
 
F339X1 Interference Suppression Film Capacitors: These capacitors feature highly rated voltage at a value of approx. 330V or 480V.  The 330V film capacitor come with a capacitance range extending from 0.0002μF to 1μF. All capacitors in this series bear minimum application temperature of 110 degree Centigrade. These components offer a very safe end-of-life behaviour and can meet a wide range of safety standard approvals.