Q-Tech Corporation introduces an advanced oven-controlled crystal oscillator (OCXO) Series for New Space applications. Designed by the company’s German affiliate, AXTAL, the AXIOM75Sx Series features both ultra-low phase noise (close-in and noise floor) and the radiation hardness required for high-performance low-earth orbit (LEO) satellite timing and frequency generation applications. Available for the frequencies of 10MHz (AXIOM75SL)…
Taiwan Semiconductor launches automotive-grade rectifiers with enhanced ESD capability
Taiwan Semiconductor announces its new line of automotive-qualified rectifiers featuring ESD withstand capability. The new TSD Series rectifiers simultaneously provide repetitive peak reverse voltage (VRRM) of up to 600V as well as ESD protection of >10,000V (per IEC-61000-4-2). Devices in the series have optional current ratings of 1A, 2A, and 3A, and operating temperature ranges from…
TDK debuts compact, efficient power supply series for medical and industrial applications
TDK Corporation announces the introduction of the TDK-Lambda brand CUS800M and CUS1000M AC-DC power supply series in a 6.73 x 3.35 x 1.67” (171 x 85 x 42.5mm) case size. Rated at up to 800W and 1000W, these very compact products also feature a variable speed fan with typically 30 – 42dBA audible noise. The…
STMicroelectronics unveils versatile automotive gate driver with comprehensive diagnostics and protection features
The L99H92 automotive gate driver from STMicroelectronics provides an SPI port for programming and diagnostics, a charge pump, protective features, and two additional current-sense amplifiers for system monitoring. Containing two high-side and two low-side drivers, the L99H92 can control a single H bridge powering one bidirectional DC motor or two half bridges for two unidirectional…
Teledyne unveils 650 V power module with integrated GaN transistor and isolated driver
Teledyne e2v HiRel Electronics proudly announces the release of the TDGM650LS60, the first product in its innovative new 650V power module family. This new module utilizes a Teledyne high-voltage Gallium Nitride (GaN) transistor and integrates an isolated driver in one package. Designed to serve as a load switch or solid-state switch, the TDGM650LS60 offers unparalleled…
onsemi expands analog portion with analog front-end for battery-powered sensor applications
onsemi announced the availability of the CEM102, a compact analog front-end (AFE) that enables electrochemical sensing with exceptional accuracy at very low currents. With its small form factor and industry-leading low power consumption, the CEM102 allows engineers to create versatile and compact solutions for industrial, environmental, and healthcare applications such as air and gas detection,…
Stackpole’s RPCA resistors deliver automotive-grade reliability and pulse-withstanding capabilities
Many types of electronic products across a variety of market segments require higher reliability components. Automotive grade resistors offer increased reliability and improved performance without the high cost and limited availability of components procured to established reliability military specifications. For those applications that also require a defined pulse withstanding the options become limited. Stackpole’s RPCA…
CUI Devices adds pogo pins and PCB pins to connector product line
CUI Devices’ Interconnect Group announced the addition of pogo pins and PCB pins to its connectors product portfolio. The CPG family of pogo and PCB pins offers gold-plated contacts for high reliability as well as a variety of pin sizes and configurations to meet an array of interconnect needs. CUI Devices’ line of pogo pins features…
Melexis’ inductive-based offers enhanced reliability for automative safety applications
Melexis has introduced the MLX92442 Induxis switch, which offers a contactless and magnet-free monolithic design to directly detect conductive targets, facilitating small module designs with reduced component count for various applications such as high voltage interlocks, charging flaps, seatbelts, hood/trunk, gear tooth sensing, or brake-by-wire systems. Traditional safety automotive latches and switches typically rely on…
Innoscience Technology unveils versatile gate driver for next-gen GaN power systems
Innoscience Technology announced the INS1001DE which is designed to drive single-channel GaN HEMTs in either low-side, high-side, or secondary-side SR applications. The new gate driver has dual non-inverting and inverting PWM inputs, enabling flexible operation with the controller, optocoupler, and digital isolator. Independent Pull-up and Pull-down outputs facilitate the control of turn-on and turn-off speeds. Driver…
HMI unveils compact SIM card level translator with advanced protections
HMI announced the launch of its HL5301WL01, a SIM card level translator with level shifting and IEC610004-2 electrostatic charge protection for SIM card ports. The HL5301WL01 integrates two unidirectional level shifters for the RST and CLK signals, a bidirectional level shifter for I/O, and ±8 kV electrostatic discharges (ESD) protection on all SIM card contacts.…
Innoscience unveils GaN gate driver for high-performance power applications
Innoscience Technology announced the INS1001DE which is designed to drive single-channel GaN HEMTs in either low-side, high-side, or secondary-side SR applications. The new gate driver has dual non-inverting and inverting PWM inputs, enabling flexible operation with the controller, optocoupler, and digital isolator. Independent Pull-up and Pull-down outputs facilitate the control of turn-on and turn-off speeds. Driver…
Kyocera AVX releases capacitor series for industrial, communications, and consumer electronics
KYOCERA AVX released the new RES Series radial-leaded aluminum electrolytic capacitors. The new RES Series wet aluminum electrolytic capacitors are engineered to deliver high CV values in small case sizes, long-lifetime endurance of 5,000–7,000 hours at 105°C, and high ripple current to help manufacturers save board space in high-density PCB assemblies without compromising on endurance. They…
TDK introduces new transformer series for gate driver applications
TDK Corporation has introduced two new types of the EPCOS InsuGate series (B78541A). These compact SMT transformers with high working voltage are suitable for gate driver applications for IGBTs and MOSFETs in e-mobility and industrial electronics. The components with a MnZn ferrite core are designed for operating frequencies of 100 kHz to 500 kHz and…
ITG Electronics’ debuts ferrite-based SMD inductors for immersion cooling applications
ITG Electronics has launched a line of narrow-body power beads for high-density applications where component space is at a premium. With a footprint of just 5X9mm and a height of 9.5mm, the company’s SLA36385A Series is ideal for data centers, primary motherboards for servers and storage devices, and other scenarios requiring components to offer high…
Microchip unveils serial SRAM for data-intensive applications
Microchip Technology has expanded its Serial SRAM product line to include larger densities of up to 4 Mb and increased Serial Peripheral Interface/Serial Quad I/O Interface (SPI/SQI) speed to 143 MHz. The 2 Mb and 4 Mb devices are designed to provide a lower-cost alternative to traditional parallel SRAM products and include optional battery backup switchover circuitry in…
IAR launches enhanced development environment for Renesas RISC- MCUs
IAR announced enhancements to its premier development environment to support the first general-purpose 32-bit RISC-V MCUs with Renesas’ internally developed CPU core. This enhanced offering includes advanced debugging capabilities and sophisticated compiler optimizations fully integrated with the Renesas Smart Configurator toolkit, design examples, rich documentation, and support for the Renesas fast prototyping board (FPB). As…
Silicon Motion launches next-gen storage devices for industrial and automotive applications
Silicon Motion Technology Corporation introduced the new generation FerriSSD NVMe PCIe Gen 4 x4 BGA SSD. This latest solution features support for i-temp and integrates advanced IntelligentSeries technology, delivering robust data integrity in extreme temperature environments that meet the rigorous demands of industrial embedded systems and automotive applications. The latest FerriSSD BGA SSD supports PCIe…
Renesas MCUs with FOTA support for smart energy management
Renesas Electronics Corporation has launched the RA2A2 microcontroller (MCU) Group powered by the Arm Cortex-M23 processor. These new low-power devices feature a 24-bit Sigma-Delta analog-to-digital converter (SDADC) and an innovative dual-bank code flash with a bank swap function, facilitating firmware over-the-air (FOTA) updates for smart energy management, building automation, medical devices, consumer electronics, and other…
Stackpole introduces anti-surge chip resistors for small electronics power needs
For GaN-based battery management for consumer electronics and computer peripherals, the demand for high power and precision is escalating. While a variety of technology options offer lower resistance values suited for these applications, all-metal element resistors, like Stackpole’s CSS/CSSH Series, remain a popular choice despite their higher cost and wider tolerance range of 1% and…