Advanced Energy Industries, Inc. announced the new NCF425 series of CF-rated medical open frame AC-DC power supplies. The system-level cardiac floating (CF) rating is a stringent medical device electrical safety classification, with certification required for equipment that has direct contact with the heart or bloodstream. Advanced Energy provides standard off-the-shelf CF-rated power products, expanding its…
AC-DC power supply extends voltage range to 800 V DC
XP Power continues to make high power flexible for ease of integration across multiple platforms by extending the reach of its HPT5K0 series with the addition of 400VDC and 800VDC models. These new additions cater to engineers designing at higher voltages, including battery charging, renewable energy, and semiconductor manufacturing equipment. All the models in the…
STMicroelectronics releases automotive amplifiers with in-play open-load detection
STMicroelectronics has revealed new class-D automotive audio amplifiers for smart-cockpit applications, engineered for tiny overall dimensions and with a digital input that simplifies circuit design. The new HFDA80D and HFDA90D extend ST’s family of high-frequency automotive amplifiers, complementing the HFA80A analog-input IC. All the devices operate at a switching frequency of 2MHz to save PCB…
Convection-cooled power controller integrates EtherCat connectivity
Advanced Energy Industries, Inc. announced a new silicon-controlled rectifier (SCR) power controller for precision control of lamp-based heating applications. Delivering unprecedented speed and accuracy, the new Thyro-XD supports next-generation semiconductor manufacturing and industrial processes that demand precision temperature control, especially during extreme and dynamic ramps. The Thyro-XD provides highly accurate, rapid load resistance measurement, enabling…
Same Sky releases encoders for 9 mm to 15.875 mm motor shafts
Same Sky’s Motion & Control Group announced the addition of the AMT25 series to its AMT absolute encoder family. The series supports motor shaft sizes from 9 mm to 15.875 mm (5/8 inch). The AMT25 series utilizes Same Sky’s capacitive ASIC technology and delivers the durability, accuracy, and environmental immunity characteristics of current AMT encoder…
FCL Components releases 20 A relay with 800 VDC switching capacity
FCL Components America, Inc., has released the FTR-E1J 20A, a tab terminal-type high voltage DC switching relay, based on its FTR-E1 series. It is screw mounted and does not use printed circuit boards. This new relay delivers 20A 800 VDC, 10A 1,000VDC higher voltage switching with no specific polarity requirements for the connection of load…
Stackpole’s current sense resistors feature long-sided terminations and 0.05 W to 3 W power range
Sense resistors are commonly used in applications such as low-power electronics, consumer devices, lighting systems, and security or detection equipment for power monitoring and control. These applications often do not require ultra-low resistance values, tight precision tolerances, or low temperature coefficient of resistance (TCR). Instead, they prioritize flexibility in form factor and affordability. Stackpole’s CSR…
TDK filters provide 30 dB insertion loss across 300 kHz to 3 GHz
TDK Corporation has expanded its YFF series of 3-terminal filters for automotive applications to include higher voltages up to 35 V and higher capacitances up to 4.7 µF. Such components are used to suppress voltage variation and high-frequency noise, which can cause system malfunctions. Mass production of the product series began in June 2025. With the miniaturization…
STMicroelectronics launches gate drivers with 6 V to 50 V operating range
STMicroelectronics has introduced the STDRIVE102H and STDRIVE102BH, beginning a new generation of integrated gate drivers for three-phase brushless motors to boost performance, efficiency, and economy in consumer and industrial equipment. With an operating-voltage range of 6V to 50V, the STDRIVE102H for single-shunt control and STDRIVE102BH for three-shunt control are easily configured through two analog pins.…
Infineon achieves DLA JANS certification for in-house manufactured GaN power devices
Infineon Technologies AG announced the first of a new family of radiation-hardened Gallium Nitride (GaN) transistors, fabricated at Infineon’s own foundry, based on its proven CoolGan technology. Designed to operate in harsh space environments, the company’s new product is the first in-house manufactured GaN transistor to earn the highest quality certification of reliability assigned by the…
Coilcraft releases 1:1 coupled power inductors with k ≥ 0.97 coupling coefficient
Coilcraft announced the MSD1514T Series of 1:1 high-temperature coupled power inductors designed for Flyback, SEPIC, Ćuk, Zeta, and related power conversion applications. The MSD_T family incorporates magnetic shielding technology to enable compact packaging while maintaining tight winding-to-winding coupling characteristics. The MSD1514T Series achieves a coupling coefficient of k ≥ 0.97, supporting implementation across multiple circuit…
ABLIC launches S-19116 automotive voltage detector with 6.8 μs response time and 2.0 μA consumption
ABLIC has launched the S-19116 Series automotive high-voltage detector. The device features a detection response time of 6.8μs maximum while maintaining current consumption of 2.0μA typical during operation. The S-19116 Series addresses functional safety requirements in automotive applications where overvoltage protection is critical for MCUs and sensors powered through battery regulators. The device detects voltage…
Littelfuse driver achieves less than 1 µA standby current for energy-efficient designs
Littelfuse, Inc. has released the IXD0579M high-speed gate driver IC designed for driving N-channel MOSFETs or IGBTs in half-bridge configurations. The device operates across a 6.5 V to 18 V supply range and integrates both a bootstrap diode and a series current limit resistor into a single 3×3 mm² TDFN-10 package, reducing component count and simplifying PCB…
Silanna launches laser driver IC with sub-2 ns FWHM pulse for LiDAR application
Silanna Semiconductor has launched the FirePower series of laser driver ICs that significantly reduce the size and increase the peak power of LiDAR applications. FirePower Laser Driver ICs are the first to combine charging and firing on a single chip. This enables a significant reduction in size and losses, as well as the removal of…
Navitas introduces 790 x 73.5 x 40 mm PSU operating between -5 °C to 45 °C
Navitas Semiconductor has announced its latest 12 kW power supply unit (PSU), designed for production, reference design for hyperscale AI data centers with high-power rack densities of 120 kW. The 12 kW PSU complies with Open Rack v3 (ORv3) specifications and Open Compute Project (OCP) guidelines. It utilizes Gen-3 Fast SiC MOSFETs, a novel ‘IntelliWeave’ digital platform, and high-power…
ITG Electronics releases gate drive transformers with 200 – 450 V DC capability
ITG Electronics has introduced a new series of gate drive transformers comprising a range of products for various needs. The company’s T201213 Series of Gate Drive Transformers spans lower-current items for general applications, such as a 200 volts direct current (VDC) version, to products offering up to 450VDC for high-voltage applications. Gate drive transformers are specialized pulse…
Stackpole introduces HCJ jumpers with 70.7 amp continuous current capability
Electronic circuits use zero-ohm jumpers to simplify routing, manufacturability, testing, and enable various design options. Jumpers with higher current capability allow for a smaller jumper chip to be used, which can reduce the space needed for a design. Traditional thick film jumpers handle up to 3 amps, while high-current versions max out at 10 amps.…
ST introduces 600V GaN gate drivers with 300 ns start-up time
STMicroelectronics’ new high-voltage half-bridge gate drivers for GaN applications add extra flexibility and features for greater efficiency and robustness. The latest STDRIVEG610 and STDRIVEG611 give designers two options to manage GaN devices in power conversion and motion applications for greater efficiency, power density, and ruggedness in consumer and industrial applications. The STDRIVEG610 addresses applications requiring…
ABLIC releases S-19116 automotive voltage detector with 6.8μs response time
ABLIC launched the S-19116 Series, a new automotive high-voltage detector with a detection response time of max. 6.8μs while achieving current consumption of 2.0μA typ. Standard voltage monitoring response times typically range from tens to hundreds of μs when detecting overvoltage faults. The new S-19116 Series achieves a detection response time of max. 6.8μs, representing…
Infineon releases GaN switch with monolithic bidirectional design
Infineon Technologies AG is introducing the CoolGaN bidirectional switch (BDS) 650 V G5, a gallium nitride (GaN) switch capable of actively blocking voltage and current in both directions. Featuring a common-drain design and a double-gate structure, it leverages Infineon’s robust gate injection transistor (GIT) technology to deliver a monolithic bidirectional switch, enabled by Infineon’s CoolGaN…