As its name suggests, long-range wide-area network or LoRaWAN technology is widely used for long-range, low-power communication in Internet-of-things (IoT) applications. In this article, we’ll guide you through the process of connecting an SX130x 868M LoRaWAN Gateway Module to a Raspberry Pi 4 using hardware attached on top (HAT). This setup creates a LoRaWAN gateway,…
Keysight launches phased array antenna control and calibration solution
Keysight Technologies has introduced its new Phased Array Antenna Control and Calibration solution, a breakthrough over-the-air (OTA) calibration and characterization solution that enables satellite designers to develop active electronically scanned arrays for satellite communications applications to rapidly test their designs during early validation. Modern satellite networks operate at higher frequencies and use active phased array…
Renesas and AMD to demo digital front-end design for 5G active antenna systems
Renesas Electronics Corporation, a supplier of advanced semiconductor solutions, has announced plans to showcase a full RF front-end solution for 5G Active Antenna Systems (AAS) radios in collaboration with AMD. Paired with the field-proven AMD Zynq UltraScale+ RFSoC Digital Front End OpenRAN Radio (O-RU) Reference Design, the RF front end includes RF switches, low-noise amplifiers…
STMicroelectronics offers new range of single-chip antenna-matching ICs
STMicroelectronics has extended its range of single-chip antenna-matching ICs that simplify RF-circuit design with two new devices optimized for BlueNRG-LPS system-on-chip ICs (SoCs) and STM32WB1x and STM32WB5x wireless microcontrollers. The MLPF-NRG-01D3 for BlueNRG-LPS and MLPF-WB-02D3 for STM32WB integrate the complete filtering and impedance-matching network needed for the best RF output power and receiver sensitivity with an external antenna. Each has 50Ω nominal…
STMicroelectronics’ common-mode filters ensure signal integrity in serial interfaces
New common-mode filters from STMicroelectronics have an extremely wide differential bandwidth of 10.7GHz to protect antenna sensitivity in adjacent wireless circuitry from the latest serial digital interfaces. The 2-channel ECMF2-40A100N10 and 4-channel ECMF4-40A100N10 are compatible with high-speed interface standards including USB 3.2 Gen 2, USB4, HDMI 2.1, and DisplayPort. With their low serial resistance of just 3Ω,…