Same Sky® and its Switches Group has added the DS06-127-SMT, DS07-254 and DS08-254-SMT piano DIP switches to its DIP switches line for space-constrained designs. The series offers widths as small as 6 mm, heights as low as 4.2 mm, 2 to 10 positions, 1.27 mm or 2.54 mm pitches, and SMT or through-hole mounting for…
How LoRa enables long-range communication
LoRa (Long Range) is a type of wireless communication technology designed to send information over long distances with low power consumption. It uses a special technique called chirp spread spectrum (CSS) modulation, which operates by continuously changing the frequency of a transmitted signal over time. This varying frequency generates a waveform (resembling the sound of…
Nordic Semiconductor introduces multiprotocol IoT SoC
Nordic Semiconductor has introduced the nRF54LC10A System-on-Chip (SoC), a multiprotocol device supporting Bluetooth® Low Energy, Bluetooth Channel Sounding, Thread, Zigbee and Matter. The SoC combines a 128 MHz Arm Cortex®-M33 processor, 1 MB of nonvolatile memory, 192 KB of RAM and a 1.9 × 2.3 mm chip-scale package for asset trackers, smart-home accessories and connected…
Nanopower Semiconductor adds 200 nA idle companion IC
Nanopower Semiconductor has announced the nPZ2100, a companion power-saving IC in its nPZero™ platform for battery-powered sensor and edge devices. The device is specified at 200 nA typical idle current at 3.0 V and 1 µA polling current, supports up to six peripherals over I²C or SPI, includes four 1 mA peripheral power switches plus…
Morse Micro launches USB Wi-Fi HaLow dongle references
Morse Micro has announced two Wi-Fi HaLow USB dongle reference designs, MM8108-RD09 and MM8108-RD17, built on the MM8108 SoC to add native IP connectivity at ranges up to 1 kilometer through a USB interface. The MM8108-RD09 supports AP and STA implementations with OpenWRT support for routers and access points plus Windows, Linux and MacOS support…
Ambiq releases edge AI SoC series
Ambiq® has released the Apollo330 Plus and Apollo510 Lite SoC series for battery-powered edge AI devices, including wearables, hearables, AR devices, digital health monitors and industrial sensors. The Arm® Cortex®-M55-based devices include up to 2 MB SRAM and 2 MB embedded NVM, AI acceleration up to 8 MACs per cycle, secureSPOT® 3.0 with Arm TrustZone®…
GigaDevice launches I²C EEPROM with integrated ECC
The GD24CL series from GigaDevice is an I²C EEPROM family for long-term storage of configuration and other critical system data in industrial, energy, IoT, data center and networking applications. The devices support 100 kHz, 400 kHz and 1 MHz I²C operation, offer endurance up to 4 million program/erase cycles, data retention up to 100 years,…
Nuvoton adds post-quantum security to secure MCU
Nuvoton Technology has announced that the NuMicro® M2354 series secure microcontroller has implemented post-quantum cryptography using the MicroPQC framework, combining Arm® TrustZone® hardware security with PSA Certified / SESIP Level 3 capabilities. Optimized for resource-constrained Cortex®-M23 designs, it reduces NTT cycle count by about 30% versus reference implementations and lowers ML-KEM-768 RAM usage to under…
Same Sky adds 2.54 mm rectangular connectors
Same Sky® has added the SSK family rectangular connectors to its interconnect portfolio, including male pin headers, female pin headers and box headers in one- and two-row configurations with 1 to 40 pins, 2.54 mm pitch and gold flash contacts. The through-hole connectors use straight pins and push-pull fastening, and are rated for 250 Vdc,…
Nordic adds AI-assisted workflow for wireless IoT
Nordic Semiconductor has introduced AI-assisted development tools for wireless IoT workflows spanning prototyping, software development, production handover and deployed device support. The capability works with Nordic MCP servers and is intended to support tasks such as proof-of-concept development, SDK migration, custom board bring-up, root-cause analysis and device debugging. The tools are designed to work with…
Taoglas unveils compact dual-band GNSS antenna series
Taoglas has announced the GVLB208 Series, an active and passive dual-band GNSS L1/L5 stacked patch antenna in a 20 x 20 x 8 mm ceramic form factor for space-constrained designs. The series supports GPS, Galileo, GLONASS and BeiDou, delivers up to 1.5 dBi peak gain with about 50% efficiency across both bands and an axial…
Variscite adds SMARC module for edge AI
Variscite has announced the upcoming VAR-SMARC-MX95, a SMARC-compatible SoM based on the NXP® i.MX 95 applications processor for industrial IoT and edge AI systems. The module will offer up to six Arm® Cortex®-A55 cores at up to 2.0 GHz, Cortex-M7 and Cortex-M33 real-time co-processors, an eIQ® Neutron Neural Processing Unit with 2 TOPS (8 eTOPS)…
MIKROE adds Ethernet board with dual-core 133MHz MCU
The ETH WIZ 3 Click from MIKROE is an Ethernet interface Click board™ based on the W55RP20 System-in-Package, which combines the W5500 Ethernet controller with a Raspberry Pi RP2040 dual-core microcontroller running at up to 133MHz. It includes a hardwired TCP/IP stack, integrated Ethernet PHY, on-chip Flash and SRAM, selectable SPI or UART communication and…
MediaTek Genio Pro hits 50 TOPS on 3 nm for robotics, drone AI
The Genio Pro, Genio 420 and Genio 360 IoT platforms from MediaTek are edge AI and embedded processors designed for IoT, robotics and machine vision systems. Built on a 3 nm process, Genio Pro integrates Arm Cortex-X925, Cortex-X4 and Cortex-A720 cores with an 8th generation NPU delivering over 50 TOPS, supports up to 16 cameras,…
Intel Core Series 2 targets deterministic real-time industrial edge
Intel used Embedded World 2026 to launch the Core Series 2 processors with P-cores, an industrial platform for edge deployments that demand deterministic real-time control alongside AI acceleration. Configurations include up to 12 P-cores at 5.9 GHz, DDR5-5600 with ECC, PCIe Gen 5, and a 10-year availability commitment, with Intel citing up to 3.8x better…
NeoCoretc releases Web-based tool to mesh network fleets from single interface
The NeoGW gateway software from NeoCortec is an open-source multiplatform gateway that connects NeoMesh wireless networks with edge systems and cloud services using MQTT integration. The software works with a web-based Network Management Tool that allows administrators to monitor and manage individual networks or fleets from a central interface. Designed for IoT monitoring systems the…
Socionext and Innatera release integrated 60 GHz radar for human motion discrimination
The jointly developed human-presence detection solution from Socionext and Innatera combines 60 GHz FMCW radar sensing with a neuromorphic Spiking Neural Processor to enable always-on detection at sub-milliwatt power levels. The system processes radar data directly at the edge to distinguish human from non-human motion, including stationary individuals, with reported accuracy above 99%, allowing connected…
Wi-SUN Alliance launches FAN 1.1 Low Energy certification
The FAN 1.1 Low Energy Certification from the Wi-SUN Alliance is a standards-based certification program that enables ultra-low-power, battery-operated and energy-harvesting devices to operate within Wi-SUN FAN mesh networks alongside higher-performance endpoints. The certification supports devices designed for long operational life, including battery-powered nodes with 10–20 year lifetimes and solar-powered systems, while maintaining secure communications,…
Understanding memory card connectors
When it comes to reliable and efficient data storage, the physical interface matters as much as the memory card itself. Designers at all levels need to understand how various card types — from the ubiquitous SD to embedded SIMs and smart cards — actually connect to and communicate with devices. The Same Sky blog post,…
How to best choose the hardware for cloud-based IoT projects
In the previous tutorials, we discussed Internet of Things (IoT) platforms, including AWS IoT Core. Any IoT solution of considerable size or complexity typically requires a platform. An IoT platform simplifies device fleet management, accelerates application development, facilitates data handling and analysis, and facilitates integration with other services. What’s more is that the selected platform…



















