STMicroelectronics

STMicroelectronics has announced the RHFLVDS42 QML-V-qualified quad LVDS receiver for aerospace applications, supporting data rates up to 600 Mbps, a 2.3 V to 3.6 V supply range and an input common-mode range from −4 V to +5 V. Operating from −55°C to +125°C, the device supports 300 krad(Si) total ionizing dose, SEL-free operation at 122.6…

STMicroelectronics’ LPS27DEWO is a MEMS pressure sensor with selectable full-scale ranges for altitude and underwater-depth monitoring beyond 50 meters. The sensor has a 2.7 × 2.7 mm 10-lead LGA package with a 1.7 mm-high metal lid, provides accuracy of ±0.5% of full scale and withstands water pressure at depths of up to 110 meters. It…

STMicroelectronics has introduced the LSM6DSK320X and ISM6HGK256X 6-axis inertial measurement units (IMUs) for consumer and industrial applications including fitness trackers, asset monitors, robots and drones. The sensors combine a super-symmetric gyroscope with dual accelerometers measuring ranges from ±16 g to ±320 g, plus a machine-learning core for event reconstruction and on-sensor processing. The 2.5 ×…

STMicroelectronics has introduced ST SafeSense VD56GA, a 1.1 MP automotive image sensor for infrared driver and occupant monitoring. Housed in a 3.7 mm × 3.2 mm CSP package, the sensor includes embedded image-processing functions, supports RAW and YUV outputs and uses the ST DeepNIR pixel architecture for infrared imaging. Its integrated functions include mirror, crop,…

STMicroelectronics has introduced the STGAP3S3 series of 3 A galvanically isolated gate drivers for 1200 V power circuits. The STGAP3S3S is optimized for SiC MOSFETs and the STGAP3S3IF is suited to IGBTs, with integrated active Miller clamp, desaturation detection, soft turn-off, UVLO diagnostics and CMTI up to 200 V/ns. Typical applications include PFC, power supplies,…

STMicroelectronics has introduced the ST54M, a single-die secure mobile chip that combines an NFC controller, secure element, eSIM and a hardware accelerator for post-quantum cryptography algorithms including ML-KEM and ML-DSA. Designed for smartphones and personal electronics, it supports applications such as contactless payments, transit ticketing, digital identity, access control and digital car keys while helping…

STMicroelectronics has introduced the ST FlightSense™ VL53L9, a direct Time-of-Flight 3D LiDAR module for robotics, industrial automation, smart buildings, AR/VR and healthcare systems. The module provides 2,268 resolution zones in a 54 x 42 array, a 54° x 42° field of view, ranging from less than 5 cm to 9 m, up to 1% accuracy…

STMicroelectronics has introduced the IIS3DWB10IS, an industrial vibration sensor with ISPU 2.0 for condition monitoring applications that need edge signal processing, AI inference and operation in harsh environments. The device measures vibrations and shocks up to 200g at frequencies of 10 kHz and above, supports operating temperatures up to 125°C and provides 40 MIPS and…

STMicroelectronics’ ASM330LHHG1 is an automotive-qualified IMU rated for operation from -40°C to 125°C, combining a 3-axis accelerometer, a 3-axis gyroscope, temperature compensation and 6-channel synchronized output to support dead reckoning, GNSS fusion and motion-data correlation. The device offers accelerometer full-scale measurement up to ±16g, gyroscope ranges from ±125dps to ±4000dps, dual high-performance and low-power operating…

The 700V PowerGaN devices from STMicroelectronics are GaN enhancement-mode transistors for high-voltage power supplies in AI servers, robotics, industrial power systems and smart-grid converters. The series includes seven HEMTs with continuous current ratings from 6 A to 29 A and typical RDS(on) from 53 mΩ to 270 mΩ, using DPAK, TO-LL and PowerFLAT packages, with…

The L9963F from STMicroelectronics is an automotive battery-management IC for lithium battery packs in hybrid and full electric vehicles, industrial energy storage systems and 48V/96V applications. Fully compatible with the L9963E, it monitors 4 to 14 stacked cells per device, scales to 31 ICs for up to 434 series cells, integrates coulomb counting, redundant cell…

STMicroelectronics has released the VD55G4 and VD65G4, ultralow-power global-shutter image sensors with monochrome or RGB output, detect-and-wake operation and interfaces for low-power microcontrollers and SoCs in battery-powered or energy-harvesting devices. The sensors can reduce power consumption by up to 10x versus conventional global-shutter sensors and shift vision systems from continuous streaming to event-driven operation to…

STMicroelectronics has released the TSB192, a dual zero-drift op amp for precision signal conditioning, with a 4 V to 36 V supply range, 20 µV offset voltage at 25°C, 100 nV/°C drift and 8 MHz gain-bandwidth for industrial, automotive, medical and measurement applications. The device combines rail-to-rail output with 5 V/µs slew rate, 11 nV/√Hz…

The DCP3603 from STMicroelectronics is a monolithic buck converter that delivers up to 3 A from a 3 mm × 1.6 mm footprint, supporting a 3.3 V to 36 V input range for applications such as smart meters, appliances and industrial 24 V systems. The device integrates power switches and compensation, operates at 1 MHz…

The STM32C5 microcontrollers from STMicroelectronics are entry-level MCUs built on an Arm Cortex-M33 core and manufactured using a 40 nm process, offering up to 1 MB Flash memory and integrated security features including AES encryption, hashing and memory protection. The devices support applications such as smart thermostats, electronic locks, industrial sensors, robotic actuators and wearable…

The MasterGaN6 from STMicroelectronics is a second-generation half-bridge power system-in-package integrating a BCD driver, GaN power transistor with 140mΩ RDS(on), LDOs and a bootstrap diode in a 9mm x 9mm QFN package. Rated for up to 10A, the device features dedicated fault and standby pins, low minimum on-time and fast propagation delays to support high-frequency…

The VNQ9050LAJ from STMicroelectronics is a 4-channel automotive high-side driver for 12 V ground-connected loads, operating from a 4 V minimum supply and maintaining functionality during cold cranking down to 2.7 V in compliance with LV124 standards. Built on VIPower™ M09 technology, the device features typical on-resistance of 50 mΩ, compatibility with 3 V and…

The STSID140-12 from STMicroelectronics is a thyristor gate driver for small AC-powered appliances such as hairdryers, dimmers and motor-driven loads, integrating an isolation transformer rated at 1250 V RMS. Packaged in a 5.35 mm × 3.45 mm DFN with 1.2 mm height, it supports zero-cross and phase-angle control and provides up to 40 mA gate…

The RHFLVDS41 low-voltage differential signaling driver from STMicroelectronics is a QML-V qualified device designed for high-speed space data links with data rates up to 600 Mbps. The driver operates over a 2.3 V to 3.6 V supply range, supports compatibility with modern low-voltage logic standards and provides radiation tolerance up to 300 krad(Si) TID with…

The STUSB4531 USB Power Delivery sink controller from STMicroelectronics is a USB PD device featuring a hardwired PD stack with AUTORUN algorithms for software-free power negotiation and management in USB-powered electronics. A newly added hybrid mode allows an external processor to access USB PD protocol layers to support functions such as Alternate modes, battery messaging…